Homemade Chic Plant Stand

I think having a plant stand indoor at different levels accentuates the living space! Since I am more of a in-store shopper than online, I like to see and feel things that I like to buy. I have seen many metal plant stands at TjMaxx and Home Goods but none of them were appealing to me. Then few days back saw a DIY video on how one can make plant stand using dowels and concrete. There are many versions available, I always combine different ideas into mine!! In one video, the dowels are tied with a string with equidistant and rested in the concrete mix and taped but in another one they used line level(tool) to check if they are equidistant.

Since I pushed my other project(making tree faces) away for a while now, this plant stand project took precedence!!

Went to Home Depot, asked a staff to help me pick the right concrete that might work. So I opted for Quikrete Commercial Grade ($4 a big bag of 80 lbs). Staff offered to get a crate and load this mix onto crate. It was impossible for me to move this bag from crate onto my car so if you are of my stature(under 135 pounds) then get help from staff!! After getting back home, I ripped the top part of the bag and moved them into different plastic bags for ease of moving and storage.

Then I purchased 2 wooden dowels (7/8 of an inch) and asked staff to cut each of them into 3 equal parts. So they were all 16 inch tall dowels of 6 in total. I did watch few videos on doing this plant stand where they end up tearing bucket or the container used. Keeping that in mind, I used plastic cake cover that we normally get from store to cover the cake!! It was a cover for an 8 inch Birthday Cake that we ordered last week for my daughter's Birthday!! I sometimes use them as plant saucer under few pots too!! 

 I added roughly about 2.5 lbs of concrete mix into this cake cover and mixed with water. Did not measure the water though! Should be of Idli batter consistency :-) I stuck in the dowels little away from center. Gently tap the mix from outside to let the air bubbles pop out. I was very much concerned about its right placement, else I would end up having woobly plant stand. I had line/surface level(tool) to measure its distance. Basically they should be equidistant from one another. I then secured each of the dowels onto cover with painter's tape. I wanted to reuse the cake cover so had to give one day time to cure. This morning when tapped from all sides the stand came out clean.

This mix mainly had tons of small pebbles and cement, so was expecting uneven surface on top but to my surprise the top was super smooth. 

Since I had left over paints, I used them to give it a better look!! I can make around 30 more of these plant stands with the concrete left :-) 

Recycled Hanging Tire Planter

I was hoarding this single Tire for more than a year now, planning to put this to some good use. Finally today my old tire got a make over!! My neighbor complimented saying "It looks beautiful, great job".

A year of contemplation has gone into what was created today(thankfully I did not think of any other project I meant)!! I wanted to have a stacked planter in the center of my front yard. That needed more tires to hoard, but who would give it to me for free! I accidentally bumped into some pictures on Pinterest that led me to the blog which inspired me to create this.

It would be unfair not to give credit to https://diyshowoff.com/2013/07/02/diy-tire-planter-tutorial/ for helping me rescue this tire that would otherwise end up in landfill.

However not all steps were followed. I skipped adding styrofoam peanuts as I was lazy to look for them in my basement. Then I consoled myself saying anyways there isn't too much space to have peanuts and soil both together inside tire. I guess it was mentioned in tutorial to help drain water better. Let's see how my tire planter will fair over summer months.

Items Needed:
Tire
Krylon Spray Paint 2 small cans(I used Red Pepper from Joann's )
Drilling machine and 1/4 inch bit, of course a strong muscle needed, used Hubby (they come handy sometimes)
Potting soil
Weed Barrier Fabric
Annuals Plants of your choice( Petunias and Impatients are probably best)
Chain (20 ft long) from Menards (max capacity load of upto 155 lbs)
2 S stainless steel hooks

Method:
1. I washed my tire with soap and water and allowed it to dry outside for an hour or so
2. I used cardboard boxes flattened and placed this tire over two bricks so I could spray paint them outdoors.
3. I turned the other side of the tire and painted, I refrained not painting it inside.
4. I let it air dry for a day outdoors.
5. Hubby drilled 6 holes on the bottom of the tire, do the drilling from inside rather than outside. This can be done by keep tire on a cement step and extending only the drilling part out of the step. Makes life easier for the person who is drilling :-)
6. I picked a tree from where this tire would suspend. I picked a biggest tree in my front yard that had a slight horizontal branch. I made sure it did not hit the main branch when there was a heavy breeze.
7. I passed one end of the chain through a old bicycle tube that goes around tree branch. This helps in not leaving any marks or bruise on the tree branch.
8. I used one stainless steel hook to join the chain around a tree branch.
9. I then positioned where my tire would land and removed the extra links from the chain. Hubby did this for me! Used second S hook to hold the tire and the other end.
10. Hubby drilled 6 holes on the bottom of the tire, do the drilling from inside rather than outside. This can be done by keep tire on a cement step and extending only the drilling part out of the step. Makes life easier for the person who is drilling :-)
11. Cut out a weed barrier fabric and lay it inside, add the potting mix and stuff your choice of plants. I had combination of annuals and perennials.

A guy at Menards was so thrilled listening to my project. He spent good half hour explaining me on how to successfully suspend a tire with all metal fitting that won't rust. His inputs will be used for future projects but for now we did not use nuts/bolts as he advised instead S hooks!!

Please leave a comment if you end up doing this project!!

My Indoor Plant Arrangements

Indoor planting is in full bloom for me in winter months. I hunt for rare ones, with new space my list of must have only grew :-)

Since we have two living spaces and tend to spend more time, I wanted my tropical plants to live and lighten up the area.

I have one corner in living room dedicated for plants and by introducing IKEA white planter it has accentuated the greenery!! I have a chain sawed Bear that we picked up from Wisconsin trip last year to add some zoological element into it. I have a Mass Cane, Darcenea (Dragon Tree), Dwarf Banana Plant(that I separated from Mother two days ago) and the White Planter has bunch of different varieties of Croton, Ponytail Palm, Dieffenbachia, Mini Darcenea and Corn Stalk Darcenea. I water them as and when top soil dries(typically once a week in Winter).

I have arranged 3 Kokedamas(wrapped up with live moss) on the black ottoman consisting of Fern and Peperomia.

I did something similar to our family room in one corner but this time I changed it to hanging lanterns that I picked up from Pier 1 Imports. I have received several compliments for its display!! I have two Mango trees (that I started from seeds), Majesty Palm and a Pot consisting of Stromanthe, Prayer Plant, Ti Plant and Oyster Plant.

The mantle above the fire place looked bare so my plants came to rescue!! I have Pothos (had it for more than 3 years), Anthurium, Boxwood Topiary and Wandering Jew plant.

The other corner of family room has Dwarf Banana Tree(Mother), Ivy Plant and a Fiddle Leaf Fig Tree.

Lastly my bed room has very minimal plant arrangement. I only have Ponytail Palms, Snake Plants and Money Tree.

My Kitchen has few herbs and Orchid plant on the window sill. I also have hanging teardrop succulents living.

Lastly I have a vintage terrarium that I still struggle to keep plants alive. Really wonder how they have designed such horrible product and my hubby purchased it for my milestone birthday!! I have sealed any openings and the little window with a silicone sealant and spray once in 15 days. I have  mini Bromeliad and Parsley Aralia living with real moss.

My Wish List:
Curry Leaf (alive)
Mango (alive)
Plantain (alive)
Bay Leaf (alive)
Goji Berry (alive)
Grapes (alive)
Cuban Oregano (alive)
Jasmine (alive)
Betal Leaf (failed to grow twice)
Dwarf Meyer Lemon (yet to arrive)
Dwarf Calamondin Orange (yet to arrive)
Dwarf Pacas Coffee (yet to arrive)
Dwarf Pomegranate (yet to arrive)
Fiddle Leaf Fig (alive)
Mass Cane (alive)
Dragon Plant or Dracaena Marginata (alive)
Pony Tail Palm (alive)
Majesty Palm (alive)
Anthurium Plant (alive)
Snake Plant (alive)
Peace Lily (need to buy)
Pothos (alive)
Wandering Jew Plant (alive)
Ivy (alive)
Topiary
Kokedoma



I have a mud room that I have converted into a plant nursery :-)